Digi IX10 User Manual page 130

Interfaces
The custom gateway/netmask.
n
IPv4 configuration:
n
The metric for IPv4 routes associated with the WAN.
l
The relative weight for IPv4 routes associated with the WAN.
l
The IPv4 management priority of the WAN. The active interface with the highest
l
management priority will have its address reported as the preferred contact address for
central management and direct device access.
The IPv4 Maximum Transmission Unit (MTU) of the WAN.
l
When to use DNS: always, never, or only when this interface is the primary default route.
l
SureLink active recovery configuration. See
l
modem failures
IPv6 configuration:
n
The metric for IPv6 routes associated with the WAN.
l
The relative weight for IPv6 routes associated with the WAN.
l
The IPv6 management priority of the WAN. The active interface with the highest
l
management priority will have its address reported as the preferred contact address for
central management and direct device access.
The IPv6 Maximum Transmission Unit (MTU) of the WAN.
l
When to use DNS: always, never, or only when this interface is the primary default route.
l
SureLink active recovery configuration. See
l
modem failures

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
for further information.
for further information.
Use Digi Remote Manager to view and manage your
Wireless Wide Area Networks (WWANs)
Configure SureLink active recovery to detect
Configure SureLink active recovery to detect
130