Table of Contents
Advertisement
Firmware configuration
Dashboard
area
Description
See
Device
Displays the IX10 device's status, statistics, and identifying information.
Network
Displays the status of the network interfaces configured on the device.
Interfaces
Modems
Provides information about the signal strength and technology of the cellular
modem(s).
Log out of the web interface
On the main menu, click your user name. Click Log out.
n
Use the local REST API to configure the IX10 device
Your IX10 device includes a REST API that can be used to return information about the device's
configuration and to make modifications to the configuration. You can view the REST API specification
from your web browser by opening the URL:
https://ip-address/cgi-bin/config.cgi
For example:
https://192.168.210.1/cgi-bin/config.cgi
Use the GET method to return device configuration information
To return device configuration, issue the GET method. For example, using curl:
$ curl -k -u admin https://ip-address/cgi-bin/config.cgi/value/path -X GET
where:
ip-address is the IP address of the IX10 device.
n
path is the path location in the configuration for the information being returned.
n
To determine allowed values for path from the Admin CLI:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
IX10 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
IX10 User Guide
Using Digi Remote
Manager.
Use the local REST API to configure the IX10 device
46
Advertisement
Table of Contents
