Digi IX10 User Manual page 234

Serial port
Item
Filters
1
Digi Remote
2
Manager
Specify a
3
device
List of
4
discovered
devices
Open
5
Configure
6
device for
Realport
Configure
7
this PC for
RealPort
RealPort
8
Devices
Refresh
9
Open Device
10
Manager
Manage the RealPort configured Digi device list
After you have enabled and configured RealPort on at least one Digi device, a list of configured
devices displays at the bottom of the Digi Navigator. You can refresh the list and easily access the
COM port configuration on your computer.
IX10 User Guide
Configure RealPort mode using the Digi Navigator
Description
Click Filters to display the types of filters that can be applied to Digi
devices, services, and IP types.
Device Filters: A list of the Digi device types displays. All types
n
are disabled by default, and when all are disabled, all types are
displayed. To filter the devices by a certain type, click the bar to
display only the selected types. See
the Digi Navigator.
Services Filters: Not applicable for devices that do not support
n
autodiscovery with Digi Navigator.
Default IP Filters: Not applicable for devices that do not support
n
autodiscovery with Digi Navigator.
Click Digi Remote Manager to launch Digi Remote Manager. See
Access Digi Remote Manager from the Digi
Expand the Specify a device section to enter the IP address of a Digi
device. See Configure RealPort on a Digi device from the Digi
Not applicable for devices that do not support autodiscovery with Digi
Navigator.
Click Open to access the web UI for the Digi device. See
UI from the Digi Navigator.
Click Configure device for Realport to configure the Digi device to use
RealPort. See Configure RealPort on a Digi device from the Digi
Navigator.
Click Configure this PC for RealPort to configure your computer to use
RealPort. See Configure RealPort on a Digi device from the Digi
Navigator.
Click RealPort Devices at the bottom of the screen to display a list of
Digi devices that are configured to use RealPort. See
on a Digi device from the Digi
Click Refresh to update the list of the Digi devices that have RealPort
enabled and configured.
Click Open Device Manager to open the Windows Properties dialog on
your computer to access the configured COM ports. The number of
COM ports configured for RealPort matches the number of serial ports
on the device.
Filter devices for display in
Navigator.
Configure RealPort
Navigator.
Navigator.
Access the web
234