Digi IX10 User Manual page 629

Applications
seconds (395002s)
request>
</requests>
</device>
</data_service>
</sci_request>
Help for using Python to respond to Digi Remote Manager SCI requests
Get help for respond to Digi Remote Manager Server Command Interface (SCI) requests by accessing
help for digidevice.device_request:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the IX10 local command line as a user
with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (main, Mar 30 2023, 23:47:13) [GCC 11.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the device_request submodule:
>>> from digidevice import device_request
>>>
4. Use the help command with device_request:
>>> help(device_request)
Help on module digidevice.device_request in digidevice:
NAME
IX10 User Guide
Firmware Build Date
Schema Version
Timezone
Current Time
CPU
Uptime
Temperature
Contact
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Disk /var Usage
Develop Python applications
: Wed, May 3, 2023 21:24:00
: 461
: UTC
: Wed, May 3, 2023 21:24:00
: 1.1
: 4 day, 13 hours, 43 minutes, 22
: 37C
: Omar Ahmad
: 0.10, 0.05, 0.00
: 85.176MB/250.484MB(34%)
: 0.068MB/13.416MB(1%)
: 47.724MB/5309.752MB(1%)
: MB/MB(%)
: 0.004MB/40.96MB(0%)
: 0.820MB/32.768MB(3%)</device_
629