Digi IX10 User Manual page 790

Containers
c. For the Automation step:
i. Click to toggle on Enable Scanning.
ii. Click to toggle on Remediate.
2. Run a manual configuration scan
applicable devices.
3. Verify that the container is running on a device:
To verify by using device metrics:
n
a. From the Remote Manager main menu, click  Management >  Devices.
b. Click the Device ID to open the device's Details page..
c. Click Metrics.
d. Information about configured containers is located under the Container Details
To verify by using the Data streams page:
n
a. From the Remote Manager main menu, click  Management >  Data Streams.
b. Locate the container's data stream:
IX10 User Guide
to apply the container and configuration settings to all
heading.
 to search using advance filtering.
i. Click
ii. Click in the search text bar and select Device ID from the menu.
iii. Type the device ID and press the Enter key.
iv. Click in the search text bar again and select Stream ID from the menu.
v. Type container and press the Enter key.
Use Digi Remote Manager to deploy and run containers
790