Table of Contents
Advertisement
Services
(config)> show service location source
0
(config)>
b. Use the index number to enable or disable the module:
n
n
Alternatively, you can use the index number to delete the USB location source:
(config)> del service location 0
(config)>
4. (Optional) Set a label for this location source:
(config)> service location source 0 label "label"
(config)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the device to use a user-defined static location
You can configured your IX10 device to use a user-defined static location.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
IX10 User Guide
enable true
no label
type modem
To enable the module:
(config)> service location source 0 enable true
(config)>
To disable the module:
(config)> service location source 0 enable false
(config)>
Use Digi Remote Manager to view and manage your
Location information
524
Advertisement
Table of Contents
