Digi IX10 User Manual page 103

Interfaces
4. Disable SureLink:
(config network interface modem> surelink enable false
(config network interface modem)>
5. Save the configuration and apply the change:
(config network interface my_wwan surelink)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Disable the default DNS test
Alternatively, you can the default DNS test for devices that use a private APN with no Internet access,
or that have restricted wired WAN connections that do not allow DNS resolution, and configure
alternate test.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Wireless Wide Area Networks (WWANs)
Use Digi Remote Manager to view and manage your
103