Digi IX10 User Manual page 784

Firewall
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Disable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to disable.
c. Click Apply to save the configuration and apply the change.
4. From a new tab in your browser, attempt to connect to the Cisco test
URL http://www.internetbadguys.com.
The connection should be successful.
5. Return to the IX10 WebUI and enable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to enable.
c. Click Apply to save the configuration and apply the change.
6. From your browser, attempt to connect
The connection attempt should fail with the message, "This site is blocked due to a phishing
threat."

Command line
This procedure assumes you have already configured web filtering to use either Cisco Umbrella or the
Cisco open DNS servers.
IX10 User Guide
to http://www.internetbadguys.com
Web filtering
again.
784