Ssh; System Backup; System Disable-Cryptography - Digi IX10 User Manual

Hide thumbs Also See for IX10:

Table of Contents

Command line interface

Perform a speed test to a remote host using nuttcp or iPerf. The system's primary default route will be

used. The speed test will take approximately 30 seconds to complete.

speedtest <host> [size INTEGER] [mode <nuttcp|iperf>] [output <text|json>]

host: The name or address of the remote speed test host/server.

size: The number of kilobytes sent in the speed test packets. (Minimum: 0, Default: 1000)

mode: The type of speed test protocol to run. (Default: nuttcp)

output: The format of output to display the speed test results as. (Default: text)

ssh

Use SSH protocol to log into a remote server.

ssh <host> <user> [port INTEGER] [command STRING]

host: The hostname or IP address of the remote host.

user: The username to use when connecting to the remote host.

port: The SSH port to use to connect to the remote host. (Minimum: 1, Maximum: 65535, Default: 22)

command: The command that will be automatically executed once the SSH session to the remote

host is established.

Save the device's configuration to a file. Archives are full backups including generated SSH keys and

dynamic DHCP lease information. Command backups are a list of CLI commands required to build the

device's configuration.

system backup [type <custom-defaults|cli-config|archive>] [path STRING]

[passphrase STRING] [remove <custom-defaults>]

type: The type of backup file to create. Archives are full backups including generated SSH keys and

dynamic DHCP lease information. CLI configuration backups are a list of CLI commands used to build

the device's configuration. (Default: archive)

path: The file path to save the backup to. (Default: /var/log/)

passphrase: Encrypt the archive with a passphrase.

remove: Remove a backup file.

Erase the device's configuration and reboot into a limited mode with no cryptography available. The

device's shell will be accessible over Telnet (port 23) at IP address 192.168.210.1. To return the device

IX10 User Guide

Command line reference