Table of Contents
Advertisement
Services
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Example performance test using iPerf3
On a remote host with iPerf3 installed, enter the following command:
$ iperf3 -c device_ip
where device_ip is the IP address of the IX10 device. For example:
$ iperf3 -c 192.168.2.1
Connecting to host 192.168.2.1, port 5201
[
4] local 192.168.3.100 port 54934 connected to 192.168.1.1 port 5201
[ ID] Interval
[
4]
0.00-1.00
[
4]
1.00-2.00
[
4]
2.00-3.00
[
4]
3.00-4.00
[
4]
4.00-5.00
[
4]
5.00-6.00
[
4]
6.00-7.00
[
4]
7.00-8.00
[
4]
8.00-9.00
[
4]
9.00-10.00
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval
[
4]
0.00-10.00
[
4]
0.00-10.00
iperf Done.
$
Configure the ping responder service
Your IX10 device's ping responder service replies to ICMP and ICMPv6 echo requests. The service is
enabled by default. You can disable the service, or you can configure the service to use an access
control list to limit the service to specified IP address, interfaces, and/or zones.
To enable the iPerf3 server:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
IX10 User Guide
Transfer
Bandwidth
sec
26.7 MBytes
224 Mbits/sec
sec
28.4 MBytes
238 Mbits/sec
sec
29.8 MBytes
250 Mbits/sec
sec
31.2 MBytes
262 Mbits/sec
sec
32.1 MBytes
269 Mbits/sec
sec
32.5 MBytes
273 Mbits/sec
sec
33.9 MBytes
284 Mbits/sec
sec
33.7 MBytes
282 Mbits/sec
sec
33.5 MBytes
281 Mbits/sec
sec
33.2 MBytes
279 Mbits/sec
Transfer
Bandwidth
sec
315 MBytes
264 Mbits/sec
sec
313 MBytes
262 Mbits/sec
Use Digi Remote Manager to view and manage your
Configure the ping responder service
Retr
Cwnd
8
2.68 MBytes
29
1.39 MBytes
0
1.46 MBytes
0
1.52 MBytes
0
1.56 MBytes
0
1.58 MBytes
0
1.60 MBytes
0
1.60 MBytes
0
1.60 MBytes
0
1.60 MBytes
Retr
37
sender
receiver
602
Advertisement
Table of Contents
