Test The Custom Container File - Digi IX10 User Manual

Hide thumbs Also See for IX10:

Table of Contents

Test the custom container file

1. Add the new container to your IX10 device:

a. Log into the IX10 WebUI as a user with Admin access.

b. From the main menu, click Status. Under Services, click Containers.

c. Click Upload New Container.

d. From your local file system, select the container file.

You can download a simple example container file, test_lxc.tgz, from the Digi website.

e. Create Configuration is selected by default. This will create a configuration on the device

for the container when it is installed. If deselected, you will need to create the

configuration manually.

f. Click Apply.

2. Select a device in Remote Manager that is configured to allow shell access to the admin user,

and click Actions > Open Console. Alternatively, log into the IX10 local command line as a user

with shell access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type shell to access the device shell.

3. At the shell prompt, type:

# lxc python_lxc

4. Execute the python command:

lxc # python /etc/test.py

Hello world.

IX10 User Guide

Create a custom container