Virtual Private Networks (VPN)
server.
6. Configure the overlay connection:
a. Click Network > Routing services > BGP.
b. Enable BGP.
c. For AS number, type the autonomous system number for this device.
d. For Best path criteria, select Multipath.
e. Click to expand Neighbours.
f. Click to add a neighbour.
g. For IP address, type the IP address of the hub.
h. Click to toggle on eBGP multihop.
7. Repeat to add additional spokes.
8. Click Apply to save the configuration and apply the change.
Command line
IX10 User Guide
Dynamic Multipoint VPN (DMVPN)
444