Digi IX10 User Manual page 104

Interfaces
3. Click Network > Interfaces.
4. Select the appropriate WAN or WWAN on which the default DNS test should be disabled..
5. After selecting the WAN or WWAN, click SureLink.
6. Click to expand Tests.
7. Click to expand the default DNS configured test.
8. Click to toggle off Enable.
9. Click  to add a new test.
10. Type a Label for the test.
11. Click to toggle on IPv6 if the test should apply to both IPv6 rather than IPv4.
12. Select the Test type.
Available test types:
IX10 User Guide
Wireless Wide Area Networks (WWANs)
104