Digi IX10 User Manual page 378

Virtual Private Networks (VPN)
3. Click VPN > OpenVPN > Servers.
4. For Add, type a name for the OpenVPN server and click .
The new OpenVPN server configuration is displayed.
The OpenVPN server is enabled by default. To disable, toggle off Enable.
5. For Device type, select the mode used by the OpenVPN server, either:
TUN (OpenVPN managed)
n
TAP - OpenVPN managed
n
TAP - Device only
n
See OpenVPN
6. If TUN (OpenVPN managed) or TAP - OpenVPN managed is selected for Device type:
a. For Zone, select the firewall zone for the OpenVPN server. For TUN device types, this
should be set to Internal to treat clients as LAN devices.
IX10 User Guide
for information about OpenVPN server modes.
OpenVPN
378