Attach To A Mounting Surface By Using The Mounting Tabs; Attach To Din Rail With Clip - Digi IX10 User Manual

Hardware setup

Attach to a mounting surface by using the mounting tabs

Attach to DIN rail with clip

The DIN rail clip is an optional accessory included when the IX10 is purchased with accessories. You
can attach the din rail clip directly to the device either on the back or the bottom of the device.
1. Attach the DIN rail clip to the back of the device:
a. Attach the DIN rail clip to the back of the device with the screws provided.
IX10 User Guide
Mount the IX10 device
37