Table of Contents
Advertisement
Firewall
2. At the Admin CLI prompt, use the
deletion:
> rm /etc/config/web-filter-id
rm: remove '/etc/config/web-filter-id'? yes
>
3. Restart the web filtering service:
> config firewall web-filter enable false
> config firewall web-filter enable true
>
Configure web filtering with manual DNS servers
Required configuration items
Enable web filtering.
n
The IP address of one or more DNS servers. Cisco provides two open DNS servers for web
n
filtering:
208.67.222.220
l
208.67.220.222
l
See
https://www.opendns.com/setupguide/
servers for web filtering.
To configure web filtering with manual DNS servers:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
rm
command to delete the web-filter-id file, and confirm the
for more information about using Cisco DNS
Use Digi Remote Manager to view and manage your
Web filtering
780
Advertisement
Table of Contents
