Digi Navigator Application Features - Digi IX10 User Manual

Serial port
Optional activities
Verify the RealPort configuration: If desired, you can verify the RealPort configuration. See
n
Configure the serial port for RealPort mode
Review the COM ports that are configured for RealPort: After RealPort configuration is
n
complete, you can open the Windows Properties dialog for the COM ports on your computer
that are configured for RealPort from within the Digi Navigator.
1. Launch the Digi Navigator if it is not currently open. A list of devices that have RealPort
enabled and configured displays in the RealPort Devices section at the bottom of the
application screen.
2. Click Open Device Manager to open the Windows Properties dialog and display the
COM ports on your computer that are configured for RealPort. For more information,
see

Digi Navigator application features

All features of the Digi Navigator are available from the main application screen.
IX10 User Guide
Manage the RealPort configured Digi device
Configure RealPort mode using the Digi Navigator
and Configure the RealPort
list.
service.
233