Digi IX10 User Manual page 95

Interfaces
(config network interface my_wwan)> surelink enable true
(config network interface my_wwan)>
5. By default, the Test DNS servers configured for this interface test is automatically
configured and enabled. This tests communication with DNS servers that are either provided
by DHCP, or statically configured for this interface.
To add additional tests:
a. Add a test:
(config network interface my_wwan)> add surelink tests end
(config network interface my_wwan surelink tests 1)>
b. New tests are enabled by default. To disable:
(config network interface my_wwan surelink tests 1)> enable false
(config network interface my_wwan surelink tests 1)>
c. Create a label for the test:
(config network interface my_wwan surelink tests 1)> label string
(config network interface my_wwan surelink tests 1)>
d. if the test should apply to both IPv6 rather than IPv4, enable IPv6:
(config network interface my_wwan surelink tests 1)> ipv6 true
(config network interface my_wwan surelink tests 1)>
e. Set the test type:
(config network interface my_wwan surelink tests 1)> test value
(config network interface my_wwan surelink tests 1)>
where value is one of:
n
IX10 User Guide
ping: Uses ICMP to determine connectivity.
If ping is selected, complete the following:
Set the ping_method:
l
(config network interface my_wwan surelink tests 1)> ping_
method value
(config network interface my_wwan surelink tests 1)>
where value is one of:
hostname: The hostname or IP address of an external server.
o
Set ping_host to the hostname or IP address of the server:
o
(config network interface my_wwan surelink tests 1)>
ping_host hostname/IP_address
(config network interface my_wwan surelink tests 1)>
interface_gateway. If set, an initial traceroute is sent to the hostname or IP
o
address configured in the SureLink advanced settings, and then the first hop
Wireless Wide Area Networks (WWANs)
95