Digi IX10 User Manual page 60

Central management
(config)> cloud drm reboot_timeout 600s
(config)>
The minimum value is 30 minutes and the maximum is 48 hours. If not set, this option is
disabled. The default is disabled.
11. firmware_url should normally be left at the default location. To change:
(config)> cloud drm firmware_url url
(config)>
12. (Optional) Set the hostname or IP address of the speedtest server. The default is
speedtest.accns.com.
(config)> cloud drm speedtest_server name
(config)>
13. (Optional) Determine whether to require a login and password to authenticate the user from
the remote cloud services CLI:
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
14. (Optional) Configure the IX10 device to communicate with remote cloud services by using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination value
(config)>
where value is either:
n
n
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
15. (Optional) Configure the IX10 device to communicate with remote cloud services by using an
HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
IX10 User Guide
Within the US: 12029823370
International: 447537431797
Configure your device for Digi Remote Manager support
60