Python Modules - Digi IX10 User Manual

Hide thumbs Also See for IX10:

Table of Contents

Applications

5. For Rules, type the following:

iptables -I INPUT -p tcp --dport 9999 -j ACCEPT

6. Click Apply to save the configuration and apply the change.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10

local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Enable custom firewall rules:

(config)> firewall custom enable true(config)>

4. Set the shell command that will execute the custom firewall rules script:

(config)> firewall custom rules "iptables -I INPUT -p tcp --dport 9999 -j

5. Save the configuration and apply the change:

(config)> save

Configuration saved.

6. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Python modules

The IX10 supports Python 3.6 and provides you with the ability to run Python applications on the

device interactively or from a file. It also offers extensions to manage your IX10:

IX10 User Guide

Develop Python applications