Digi IX10 User Manual page 534

Services
all remote
sources, and all forwarded sentences from remote sources will use
the configured
ID.
Format:
Default value: Default
Current value: Default
(config service location forward 0)>
ii. Set the talker ID:
(config service location forward 0)> talker_id value
(config service location forward 0)>
The default setting is Default, which means that the talker ID provided by the source will
be used.
b. Determine the behavior when fix is invalid:
(config service location forward 0)> no_fix value
(config service location forward 0)>
where value is one of:
n
n
n
The default is empty.
9. (Optional) Set the text to prepend to the forwarded message. Two variables can be included in
the prepended text:
%s: Includes the IX10 device's serial number in the prepended text.
n
%v: Includes the vehicle ID in the prepended text.
n
(config service location forward 0)> prepend __|%s|__|%v|__
(config service location forward 0)>
10. (Optional) Set the vehicle ID.
Allowed value is a four digit alphanumerical string (for example, 01A3 or 1234). If no vehicle ID
is configured, this setting defaults to 0000.
(config service location forward 0)> vehicle-id 1234
(config service location forward 0)>
11. (Optional) Provide a description of the remote host:
IX10 User Guide
Default
GA
GB
GI
GL
GN
GP
GQ
none: No messages are sent.
empty: Send messages with empty fields.
last_fix: Send messages with information from the last valid fix.
Location information
534