Digi IX10 User Manual page 81

Interfaces
n
n
n
IX10 User Guide
(config network interface my_wwan surelink tests 1)>
interface_down_time 600s
(config)>
Set the amount of time to wait for the interface to connect for the first time
l
before the test is considered to have failed.
(config network interface my_wwan surelink tests 1)>
interface_timeout value
(config network interface my_wwan surelink tests 1)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_timeout to ten minutes, enter either 10m or
600s:
(config network interface my_wwan surelink tests 1)>
interface_timeout 600s
(config)>
custom_test: Tests the interface with custom commands.
If custom_test is set, set the commands to run to perform the test:
(config network interface my_wwan
test_commands "string"
(config network interface my_wwan surelink tests 1)>
tcp_connection: Tests that the interface can reach a destination port on the
configured host.
If tcp_connection is selected, complete the following:
Set the hostname or IP address of the host to create a TCP connection to:
l
(config network interface my_wwan surelink tests 1)> tcp_host
hostname/IP_address
(config network interface my_wwan surelink tests 1)>
Set the TCP port to create a TCP connection to.
l
(config network interface my_wwan surelink tests 1)> tcp_port
port
(config network interface my_wwan surelink tests 1)>
other: Tests the status of another interface.
If other is selected, complete the following:
Wireless Wide Area Networks (WWANs)
surelink tests 1)> custom_
81