Table of Contents
Advertisement
Interfaces
3. Click Network > Interfaces.
4. Create the LAN or select an existing LAN:
To create a new LAN, for Add interface, type a name for the LAN and click .
n
To edit an existing LAN, click to expand the LAN.
n
The Interface configuration window is displayed.
New LANs are enabled by default. To disable, toggle off Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select the appropriate firewall zone. See
information.
7. For Device, select an Ethernet device.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The IX10 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the IX10 device.
c. Set the Reauth period.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
IX10 User Guide
Local Area Networks (LANs)
Firewall configuration
for further
146
Advertisement
Table of Contents
