Digi IX10 User Manual page 87

Hide thumbs Also See for IX10:

Table of Contents

(config)> network interface my_wan surelink timeout 600s

The default is 15s.

f. Set the amount of time to wait while the device is starting before SureLink testing begins.

This setting is bypassed when the interface is determined to be up.

(config)> network interface my_wwan surelink advanced delayed_start

where value is any number of weeks, days, hours, minutes, or seconds, and takes the

format number{w|d|h|m|s}.

For example, to set delayed_start to ten minutes, enter either 10m or 600s:

(config)> network interface my_wan surelink advanced delayed_start

The default is 300s.

g. Set the time to add to the test interval when restarting the list of actions. This option is

capped at 15 minutes.

(config)> network interface my_wwan surelink advanced backoff_interval

where value is any number of weeks, days, hours, minutes, or seconds, and takes the

format number{w|d|h|m|s}.

For example, to set backoff_interval to ten minutes, enter either 10m or 600s:

(config)> network interface my_wan surelink advanced backoff_interval

The default is 300 seconds.

h. The interface_gateway parameter is used by the Interface gateway Ping test as the

endpoint for traceroute to use to determine the interface gateway. The default is 8.8.8.8,

and should only be changed if this IP address is not accessible due to networking issues.

To set to an alternate host:

(config)> network interface my_wwan surelink advanced interface_

gateway hostname/IP_address

8. Save the configuration and apply the change:

(config network interface my_wwan ipv4 surelink)> save

Configuration saved.

IX10 User Guide

Wireless Wide Area Networks (WWANs)