Move Within The Configuration Schema - Digi IX10 User Manual

Command line interface
c. Enter enable ? to display help for the enable parameter:
Either of these methods will display the following information:
(config)> service ssh enable ?
Enable: Enable the service.
Format: true, false, yes, no, 1, 0
Default value: true
Current value: true
(config)> service ssh enable

Move within the configuration schema

You can perform configuration tasks at the CLI by moving within the configuration.
Move forward one node in the configuration by entering the name of an Additional
n
Configuration option:
1. At the config prompt, type service to move to the service node:
(config)> service
(config service)>
2. Type ssh to move to the ssh node:
(config service)> ssh
(config service ssh)>
3. Type acl to move to the acl node:
(config service ssh)> acl
(config service ssh acl)>
4. Type zone to move to the zone node:
(config service ssh acl)> zone
(config service ssh acl zone)>
You can also enter multiple nodes at once to move multiple steps in the configuration:
(config)> service ssh acl zone
(config service ssh acl zone)>
Move backward one node in the configuration by entering two periods (..):
n
(config service ssh acl zone)> ..
(config service ssh acl)>
IX10 User Guide
(config service ssh)> enable ?
(config service ssh)>
Configuration mode
959