Packet Filtering; Configure Packet Filtering - Digi IX10 User Manual

Firewall

Packet filtering

Configure packet filtering

Required configuration items
The action that the packet filtering rule will perform, either Accept, Reject, or Drop.
n
The source firewall zone: Packets originating from interfaces on this zone will be monitored by
n
this rule.
The destination firewall zone: Packets destined for interfaces on this zone will be accepted,
n
rejected, or dropped by this rule.
Additional configuration requirements
A label for the rule.
n
The IP version to be matched, either IPv4, IPv6, or Any.
n
The protocol to be matched, one of:
n
TCP
l
UDP
l
ICMP
l
ICMP6
l
Any
l
To configure a packet filtering rule:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
IX10 User Guide
Use Digi Remote Manager to view and manage your
Packet filtering
757