Digi IX10 User Manual page 96

Interfaces
n
n
n
n
IX10 User Guide
in that route is used for the ping test.
o interface_address.
interface_dns: The interface's DNS server.
o
Set the number of bytes to send as part of the ping payload:
l
(config network interface my_wwan ipsec tunnel ipsec_example
surelink tests 1)> ping_size int
(config network interface my_wwan surelink tests 1)>
dns: Performs a DNS query to the named DNS server.
If dns is set, set the IPv4 or IPv6 address of the DNS server:
(config network interface my_wwan surelink tests 1)> dns_server
IP_address
(config network interface my_wwan surelink tests 1)>
http: Uses HTTP(s) GET requests to determine connectivity to the configured web
server.
If http is set, set the URL of the web server.
(config network interface my_wwan surelink tests 1)> http url
(config network interface my_wwan surelink tests 1)>
dns_configured: Tests communication with DNS servers that are either provided by
DHCP, or statically configured for this interface.
interface_up: Tests the current status of the interface. The test fails if the interface
is down. Failing this test infers that all other tests fail.
If interface_up is set, complete the following:
Set the amount of time that the interface is down before the test can be
l
considered to have failed.
(config network interface my_wwan surelink tests 1)>
interface_down_time value
(config network interface my_wwan surelink tests 1)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_down_time to ten minutes, enter either 10m or
600s:
(config network interface my_wwan surelink tests 1)>
interface_down_time 600s
(config)>
Set the amount of time to wait for the interface to connect for the first time
l
before the test is considered to have failed.
Wireless Wide Area Networks (WWANs)
96