Change A Local User's Password - Digi IX10 User Manual

User authentication

Change a local user's password

To change a user's password:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. Click the username to expand the user's configuration node.
5. For Password, enter the new password. The password must be at least eight characters long
and must contain at least one uppercase letter, one lowercase letter, one number, and one
special character.
For the admin user, the password field can be left blank:
If the password field for the admin user is left blank, the admin user's password will be
n
the default password printed on the device's label.
IX10 User Guide
Use Digi Remote Manager to view and manage your
Local users
693