Digi IX10 User Manual page 827

System administration
4. In the Configuration backup section, click SAVE.
Do not set a Passphrase for the configuration backup. The file will be downloaded using your
browser's standard download process.
5. After the configuration backup file has been downloaded, rename the file to:
custom-default-config.bin
6. Upload the file to the device:
a. From the main menu, select System > Filesystem.
b. Under Default device configuration, click .
c. Select the file from your local file system.
7. Reboot the device.
Note After configuring a device to use custom factory default settings, wait five minutes after
restoring to defaults before:
Powering off the device.
n
Performing any additional
n
If you do not wait five minutes after restoring to custom factory defaults before performing these
activities, the device will clear the custom factory defaults and reboot to standard factory defaults.

Command line
IX10 User Guide
Erase device configuration and reset to factory defaults
configuration restoration activities.
827