The Page menu in the Parameter area: first page of parameters for the Sampler Module.
2.2.7
Undo and Redo
Undo and Redo are useful to cancel operations you have performed or to compare two versions
before and after a change. You can undo nearly everything you did after loading or creating
your Project.
Note: If you save your Project, you will no longer be able to undo or redo any actions per-
formed before saving!
Hardware
On the MASCHINE hardware controller, perform the Undo operation by pressing
►
pad 1. To perform the Redo operation, press
Software
In the software, use the common keyboard shortcuts for the Undo and Redo functions. For Un-
do, press [Ctrl]+[Z] ([Cmd]+[Z] on Mac OS X). For Redo, press [Ctrl]+[Y] ([Cmd]+[Y] on Mac
OS X). You can also select Undo and Redo from the
2.2.8
Pinning a Mode
You can pin a mode on your controller by pressing the relevant mode button (SCENE,
TERN, etc.) + Button 1 above the left display.
SHIFT
+ pad 2.
Edit
menu.
MASCHINE MIKRO MK2 - Manual - 30
Basic Concepts
Common Operations
SHIFT
+
PAT-