Velocity Destination And Modwheel Destination - Native Instruments Groove production studio Manual

4.2.6 Page 6: Velocity Destination and Modwheel Destination
Sampler VELOCITY DESTINATION on the hardware.
Sampler Velocity Destination on the software.
Velocity Destination
Velocity Destination Controls
Start
Decay
Cutoff
Volume
This is a built-in modulation source that allows you to modulate the sam-
ple Start parameter on page 2 based on the input velocity. Positive values
shift the sample start position later in time as you play harder, negative
values shift it closer to the beginning of the sample as you play harder.
Tip: a typical example for this parameter is setting it so that the initial at-
tack transient of a snare drum is heard only at high velocity values. This
makes it sound "snappier" when you play hard, and "mushier" or muted
when you play softly.
This allows you to modulate the
lope on page 2 by using Velocity.
This allows you to modulate the
types LP, HP, BP (on page 3).
This allows you to modulate volume, which is what Velocity normally is
used for.
The Sampler Parameters in Module 1
Decay parameter of the Amplitude Enve-
Cutoff parameter of the Filters with filter
MASCHINE - Manual - 71
Sound Slots