Clearing Groups And Sounds - Native Instruments Maschine Jam Manual

Element
TIME SHIFT
Step
6.4.6

Clearing Groups and Sounds

You can clear Groups and Sounds from your Project using MASCHINE JAM.
Clearing Groups
When a Group is cleared its Patterns are also removed from the Project.
On your controller, do the following to clear a Group:
1. Press and hold CLEAR.
2. Press the Group (A-H) button you want to clear. If your Project contains more than eight
Groups, use the left and right arrows of the D-pad to access other Group banks.
The Group, all its Sounds, and Patterns are removed.
→
Clearing Sounds
You can clear Sounds from Sound slots (and thereby across click-pads) and Groups in your
Project using MASCHINE JAM.
When a Sound is cleared it is removed from the Sound slot and its events are removed from
the Pattern.
On your controller in Pad Mode, do the following to clear a Sound:
Description
Set the amount of time shift per step. The value is applied to all
notes and will move them randomly in both plus and minus values
according to the overall percentage set here.
Step can be changed from +/- 0-50% in 5% increments. Press
SHIFT to change in finer increments of 1%.
Recording and Editing Patterns
Editing a Pattern
MASCHINE JAM - Manual - 108