Setting The Cassette - Canon iR5000 Service Manual

CHAPTER 3 INSTALLATION

2.11 Setting the Cassette

Step
1 Push the cassette releasing button, and slide
out each cassette to the front; then remove
the packing materials.
2 Set the side plate of each cassette to the hole
identified by the marking M (M4/A3).
Fit the Inch-preventing roll that comes with
the machine from inside the cassette so that it
covers the hole (STMT-R) identified by the
marking A and the one (LTR-R) identified by
the marking H.
• Be sure there is no gap.
• Perform this step only when the
use of Inch-configured paper is
not planned.
3 Set the cassettes to the appropriate sizes to
suit the user's needs and attach the sticker
indicating the new sizes.
4 Slide the cassettes into the machine.
3-16 S
Work
COPYRIGHT © 2000 CANON INC.
Checks/remarks
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
Marking A
Marking H