Analog Die Interrupt Enable Register - Analog Devices ADuCM355 Hardware Reference Manual

ADuCM355 Hardware Reference Manual

ANALOG DIE INTERRUPT ENABLE REGISTER

Address: 0x400C0A28, Reset: 0x0000, Name: EI2CON
Table 50. Bit Descriptions for EI2CON
Bits Bit Name Settings
[15:4] Reserved
3 BUSINTEN
[2:0] Reserved
Description
Reserved.
Bus Interrupt Detection Enable Bit. Set before entering hibernate to enable the AFE
wakeup via any analog die access.
0 Die interface interrupt wakeup disabled.
1 Die interface interrupt wakeup enabled.
Reserved. Leave as 0.
Rev. B | Page 51 of 312
UG-1262
Reset Access
0x0 R
0x0 R/W
0x0 R/W