Operating Module Information Screen - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.2.2 Operating Module information screen

The Module information screen displays the LED and switch statuses, error information,
and drive information of the C Controller module.
Q06CCPU-V
9
- 15 9.2 C Controller Setting Utility
9.2.2 Operating Module information screen
POINT
1. Monitoring is stopped when the <<Module information>> tab is switched to
another tab during monitor.
Monitoring resumes when the <<Module information>> tab is opened again.
2. If a communication error has occurred during connection, click the
Start monitoring
3. Communication are not available during reset of the C Controller module.
Start communication after terminating the reset process.
Figure 9.19 Module information screen
button or set Connection settings again.
Q06CCPU-V-B