Mitsubishi MELSEC-Q Series User Manual page 773

18
TROUBLESHOOTING
(5) Confirming hardware self-diagnostic test result
Remark
(a) Normal completion
1) The LED that was flashing during the self-diagnostic test turns off.
Figure 18.22 LED status after normal completion (for the Q06CCPU-V)
2) Switch the power off to terminate the hardware self-diagnostics mode.
When the standard ROM format setting is made, the standard ROM is formatted
during the next startup of the C Controller module.
Upon normal completion, the RUN LED and USER LED turn off, and the MODE
LED starts flashing green.
RUN On MODE
CF CARD ERR.
CH2 SD/RD USER
18.5 Hardware Self-diagnostic Function
17
18
18
- 92