Details Of I/O Assignment By C Controller Setting Utility - Mitsubishi MELSEC-Q Series User Manual

6
I/O NUMBER ASSIGNMENT

6.6.2 Details of I/O assignment by C Controller setting utility

In I/O assignment, the "Type (module type)", "Points (I/O points)" and "Start X/Y" (starting
I/O number) can be set for each slot of the base units.
For example, to change the number of occupied I/O points of a designated slot, only the
number of occupied I/O points can be designated.
For the items containing no setting, mounting status on the base unit is applied.
(1) I/O assignment
Set I/O assignment on the <<I/O assignment settings>> tab of the C Controller setting
utility.
(a) Slot
(a) (b) (c)
Figure 6.16 I/O assignment settings
The slot No. and what number of the slot on what number of the stage are
displayed for each slot.
When the base unit is set in Auto mode, "*" indicates the base unit stage number
and the slot number counted from Slot 0 of the main base unit is displayed.
6.6 I/O Assignment by C Controller Setting Utility
6.6.2 Details of I/O assignment by C Controller setting utility
(d) (e)
1
2
3
4
5
6
7
8
6
- 19