Setting Device To Be Monitored - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.6.5 Setting device to be monitored

Set the device to be monitored.
(1) Menu item to be selected
(2) Dialog box
Device type
Device No.
Register device list
9
- 185 9.6 Device Monitoring Utility
9.6.5 Setting device to be monitored
POINT
The devices that can be monitored by 16-point register monitoring are only
randomly accessible devices.
If the specified device does not allow random access, a device type error (-3) will
occur.
Refer to the following for random accessibility of each device.
Section 10.3.12
Select [Setting] [Device settings] from the menu bar.
Batch monitoring
Table9.124 Explanation of Device settings dialog box
Item
button
Set
button
Change
button
Delete
Figure 9.139 Device settings dialog box
Set the type ( Section 10.3.11), block No., and network No. of
the device to be monitored.
Set the start No. of the device to be monitored.
(HEX: Hexadecimal, DEC: Decimal, OCT: Octal)
Displays the registered devices as a list.
Registers the settings of Device type and Device No., and adds them
to the Register device list.
Select a device to be changed and click this button to change the
registered setting.
Select the device to be deleted and click this button to delete the
device from the Register device list.
16-point register monitoring
Description