Mitsubishi MELSEC-Q Series User Manual page 480

9
UTILITY OPERATION
(1) Menu item to be selected
(2) Dialog box
Device type
Device No.
Setting data
Points
9
- 189 9.6 Device Monitoring Utility
9.6.7 Changing word device values continuously
Select [Write device]
Figure 9.141 Continuous data change dialog box
Table9.126 Explanation of Continuous data change dialog box
Item
Set the type, block No., and network No. of the device whose data will
be changed. (
Set the start No. of the device whose data will be changed.
(HEX: Hexadecimal, DEC: Decimal, OCT: Octal)
Set new data for continuous change. (HEX: Hexadecimal, DEC:
Decimal)
Set the points for which data will be changed continuously.
(HEX: Hexadecimal, DEC: Decimal, OCT: Octal)
[Continuous data change] from the menu bar.
Description
Section 10.3.11)