Mitsubishi MELSEC-Q Series User Manual page 50

2
SYSTEM CONFIGURATION
(3) When the multiple CPU high speed main base unit (Q3 DB) is used
Commercially available
CompactFlash card (to be
purchased separately)
Remark
2
- 4 2.1 System Configuration
2.1.1 Devices to be used
*1
Battery
Extension cable
Figure 2.3 System configuration when Q3 DB is used
* 1 The CompactFlash card cannot be installed to the Q06CCPU-V-B.
• For the applicable base unit, extension cable, and power supply module, refer to
Section 2.1.4 (3).
• For the applicable I/O module and intelligent function module, refer to Section
2.2.1.
C Controller module
Extension base unit
Q3 DB multiple CPU high
speed main base unit
Q series power supply, I/O, Intelligent function modules