Mitsubishi MELSEC-Q Series User Manual page 399

9
UTILITY OPERATION
Table9.70 Explanation of Communication status of each station screen
Item
button
OK
Own station information
Communication status of each
station
(a) Communication status of each station screen
Displays the baton pass status (availability of transient transmission).
The number of displayed stations is equal to the "Total stations" set on the
"Parameter settings" screen.
Figure 9.82 Communication status of each station screen
Closes the "Communication status of each station" screen.
Displays the own station information of the MELSECNET/H
module.
( This section (1))
Displays the baton pass status (availability of transient
transmission) as shown below.
Light blue: Normally communicating station or reserved
station
Red : Communication error station (Disconnected)
Description
9.4 MELSECNET/H Utility
9.4.4 Operating Other station monitoring screen
Correspon- Correspon-
ding SB ding SW
SW0040,
SB0044,
SW0041,
SB0057,
SW0042,
SB005A
SW0046
SW0070
to
SW0073
9
- 108
9
10
11
12
13
14
15
16