Mitsubishi MELSEC-Q Series User Manual page 629

13
MULTIPLE CPU SYSTEM CONCEPT
<<I/O assignment settings>> tab
2) Output (Y) data are loaded from the modules indicated in Table13.12 that are
mounted on the main base unit and extension base unit.
Table13.12 Modules trom which outputs can be loaded
Type setting on
of C Controller setting utility
None
Output
I/O mix
Intelli.
3) Cyclic data of a CC-Link IE controller network, MELSECNET/H, or CC-Link
module that is controlled by another CPU cannot be read out directly from the
refresh target devices or empty slots.
To read those cyclic data, assign the refresh target devices to the auto refresh
area in the CPU shared memory.
(b) When "Not all CPUs can read all outputs" has been set
The ON/OFF data output from another CPU to output modules and intelligent
function modules cannot be loaded into the host CPU's output (Y) (remains at
OFF.)
13.4 Access Ranges between CPU Modules and Other Modules
Mounted module
Output module
I/O composite module
Intelligent function module
Output module
I/O composite module
Intelligent function module
13.4.2 Access to non-controlled modules
9
10
11
12
13
14
15
16
13
- 25