Mitsubishi MELSEC-Q Series User Manual page 233

5
SETTINGS AND PROCEDURES BEFORE OPERATION
(b) Installing a CompactFlash card
(c) Closing the front cover
(d) Checking the installation
When installing a CompactFlash card into the C Controller module, pay attention
to its orientation.
Push the CompactFlash card into the slot until the CompactFlash card edge is
flush with the EJECT button.
EJECT button
Orientation of
CompactFlash
card
CompactFlash card slot
Figure 5.43 Installing a CompactFlash card
Close the front cover of the C Controller module until it clicks.
Store the removed dummy CompactFlash card in a safe place for future use.
Check whether the CompactFlash card has been correctly installed into the C
Controller module.
(Make sure that the CF CARD LED turns on at power-on.)
5.8 Installing/Removing CompactFlash Card and Access Stop
STOP
MODE RUN
CompactFlash card
RESET SEL.
Projected part
5.8.1 Installing/removing CompactFlash card
1
2
3
4
5
6
7
8
5
- 47