Mitsubishi MELSEC-Q Series User Manual page 460

9
UTILITY OPERATION
Item
button
Equal assignment
button
Supplementary settings
button
Clear
button
Check
button
End
button
Cancel
9
- 169 9.5 CC IE Control utility
9.5.5 Operating Parameter settings screen
Table9.111 Explanation of Network range assignment screen (Continued)
Displays the "Equal assignment" screen.(
Displays the "Supplementary settings" screen.(
Erases the "Points", "Start", and "End" settings and sets the initial values to "Total
stations" and "Monitoring time".
Checks the "Points", "Start", "End", " Total stations" and "Monitoring time" settings for
errors.
Saves the settings and closes the "Network range assignment" screen.
Closes the "Network range assignment" screen without saving the settings.
(a) Network range assignment setting ranges
The following indicates the setting ranges of network range assignment.
Table9.112 Setting ranges of network range assignment
Device name
LX
LY
LB
LW
* 1 Only a multiple of 16 can be set to "Points" and "Start" of LX, LY and LB.
* 2 Only a (multiple of 16 -1) can be set to "End" of LX, LY and LB.
Description
This section (5))
Points/Start/End
Points
Start
End
Points
Start
End
Points
Start
End
Points
Start
End
This section (6))
Setting range
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 32768
*1
0000 to 7FF0
*2
000F to 7FFF
1 to 131072
0000 to 1FFFF
0000 to 1FFFF