Program Registration - Mitsubishi MELSEC-Q Series User Manual

10
FUNCTIONS AND PROGRAMMING

10.2.7 Program registration

Each file is registered to a C Controller module by writing the file to the standard ROM of
the C Controller module or a CompactFlash card.
Registration via FTP
Copy registration from CompactFlash card to standard ROM
Copy registration from development environment (personal
computer) to CompactFlash card
(1) Registration via FTP
Standard ROM
CompactFlash card
System drive
RAM disk
User name
Password
10
- 27 10.2 Programming Using Bus Interface Functions
10.2.7 Program registration
Table10.6 How to write to each drive
Writing method
* 1 For the Q06CCPU-V-B, CompactFlash cards cannot be used.
POINT
Before registering the files to the standard ROM or CompactFlash card, close all
running tasks in the C Controller module.
The following explains the registration of the files to the C Controller module via FTP.
(a) Drives and operations allowed for FTP
The following indicates the drive names and operations allowed for registration via
FTP.
Drive
* 1 This drive name is for the sample program (MakeRAMDisk.c).
Any name can be given to the RAM disk drive when creating the RAM disk.
(b) Login user for use of FTP
The following indicates the login user data (user name, password) for use of FTP.
Item
Refer to Section 5.11 for the addition or change of the login user, etc. other than
the above defaults.
Standard
ROM
Table10.7 Drives available for FTP
Drive name
/ROM Write/read enabled
/CF Write/read enabled
/SYSTEMROM Only read enabled
*1
Write/read enabled
/RAM
Table10.8 Login user defaults
" "
target
" "
password
Program storage location
CompactFlash
RAM disk
*1
card
: Available, : Not Available
Operation
Value