Mitsubishi MELSEC-Q Series User Manual page 433

Hide thumbs Also See for MELSEC-Q Series:

Table of Contents

UTILITY OPERATION

Change module

Selected station

Change station

Start monitoring

Stop monitoring

Network information

Network device status of selected

Communication test

Link start/stop

Table9.96 Explanation of Diagnostics result screen

Displays the "Select diagnostics destination" screen when there are two or more CC-

Link IE controller network modules that are controlled by the C Controller module.

Change the network to the one that is to be diagnosed.

Entering a station No. and clicking the

The status of the selected station is displayed in the "Network device status of selected

station" area.

(Initial value: Station No. of the connected station, Setting range: 1 to 120)

Determines the entry in "Selected station".

Starts automatic updating of the "CC IE Control Network diagnostics result" screen.

Stops automatic updating of the "CC IE Control Network diagnostics result" screen.

Displays the link status and station status of the network.

This section (1))

Displays the detailed information on the selected station.

This section (2))

Displays the "Communication Test" screen.

This section (3))

Displays the "Link start/stop" screen.

This section (4))

Displays the "Logging" screen.

This section (5))

Closes the "CC IE Control Network diagnostics result" screen.

button will complete the entry.

Change station

9.5 CC IE Control utility

9.5.3 Operating Diagnostics result screen