Mitsubishi MELSEC-Q Series User Manual page 340

9
UTILITY OPERATION
(1) I/O assignment settings screen
I/O assignment settings
System settings
Item
Slot
Type
I/O
assign-
ment
Model name
Points
Start X/Y
Switch settings
Detailed settings
Base
Base model
setting
9
- 49 9.2 C Controller Setting Utility
9.2.8 Operating I/O assignment settings screen
Figure 9.43 I/O assignment settings screen
Table9.27 Explanation of I/O assignment settings screen
Displays the "Slot No." of the mounted module, the stage No. of the base
unit mounted with the module, and the installation position on the base
unit.
Specify the type of the mounted module.
In a multiple CPU system configuration, no error will be displayed even if
"CPU (Empty)" is set to the position not supported by the C Controller
module. Check for incorrect setting.
(Initial value: " " (Blank), Setting range: " " (Blank), "Empty", "Input", "Hi.
input", "Output", "I/O mix", "Intelli.", "Interrupt", "No. 1"
*1
"CPU (Empty)"
Enter the model name of the mounted module.
Specify the I/O points when changing the I/O points of each slot.
(Initial value: " " (Blank), Setting range: 0, 16, 32, 48, 64, 128, 256, 512,
1024)
Specify the I/O No. when changing the I/O No. of each slot.
Opens the "Switch settings for I/O and intelligent function module" screen.
button
button Opens the "Intelligent function module detailed settings" screen.
Set the model name of the base unit.
* 1 Can be set only in a multiple CPU system configuration.
Multiple CPU settings Communication diagnostics
Description
)
Reference
section
6.6.2
6.6.2,
12.2.2
*1 *1
, to "No. 4" ,
6.6.2
6.6.2
6.6.2
This section
This section
(To next page)
(2)
(3)