Mitsubishi MELSEC-Q Series User Manual page 366

9
UTILITY OPERATION
Module information Other station monitoring
Item
Number of modules
Target module
Start I/O No.
Channel No.
button
Default
button
Check
9
- 75 9.3 CC-Link Utility
9.3.5 Operating Parameter settings screen
Table9.52 Explanation of Parameter settings screen
Online operation
Set the number of CC-Link modules to be controlled by the C Controller module.
Selecting " (Blank)" is recognized as no setting (Setting clear).
(Initial value: " (Blank)" , Setting range: 1 to 8, " (Blank)" )
Select the module for which parameters are set. (Initial value: 1, Setting range: 1 to 8)
Refer to the following for details of the number assigned to this item.
This section (1)(a)
Set the start I/O No. of the CC-Link module.
(Setting range: 0 to FE0 (Note that duplication with the start I/O No. set to another CC-
H
Link module is not allowed.))
Set the channel No. of the CC-Link module.
Use the value set here when opening the channel from the Device monitoring utility or
user program (MELSEC data link function).
(Setting range: 81 to 88 (Note that duplication with the channel No. set to another CC-
Link module is not allowed.))
Sets the initial values to the parameters "Operation settings" and "Station information
settings".
Checks for any setting error.
Parameter settings
Description
Target settings Test
(To next page)