Mitsubishi MELSEC-Q Series User Manual page 675

17
STARTING MULTIPLE CPU SYSTEM
17.2.3 When creating new
Start the C Controller setting utility.
Connect to the C Controller module.
Basic
Note17.1
Universal
UD
Note17.1
íç1
When a Basic model QCPU or Q02UCPU is used, do not set "4" to Number of CPU since the
Universal Basic
UD
number of mountable CPU modules is limited up to 3.
Note17.1 Note17.1
systemíç1
Start
(To next page)
17.2 Setting Parameters Added for Multiple CPU System
"Points occupied by empty slot" (optional) on
<<System settings>> tab
Set the points to be occupied by one empty slot.
Default: 16 points
"Number of CPUs" (setup required) on
<<Multiple CPUs settings>> tab
Set the number of CPU modules to be mounted on the
main base unit in the multiple CPU system. Note 17.1
17.2.3 When creating new system
17
18
Note17.1
17
- 6