Mitsubishi MELSEC-Q Series User Manual page 570

12
MULTIPLE CPU SYSTEM CONFIGURATION
(2)
12
- 4 12.1 System Configuration
12.1.1 Devices to be used
When using the slim type main base unit (Q3 SB)
Commercially available
CompactFlash card (to be
*4
purchased separately)
Battery
* 1 The programmable controller CPU does not accept the CompactFlash card.
* 2 As a power supply module, use the slim type power supply module.
Keep the current consumption within the rated output current of the power supply module.
The Q series power supply module and the redundant power supply module are not available for
the power supply module.
* 3 The slim type main base unit does not have an extension cable connector.
The extension base unit or GOT cannot be connected.
* 4 The Q06CCPU-V-B does not accept any CompactFlash card.
Figure 12.2 System configuration for using Q3 SB
POINT
1. For combinations of configurable CPU modules, refer to Section 13.1.
2. When the slim type main base unit (Q3 SB) is used, the Motion CPU is not
applicable.
3. The slim type main base unit is applicable only when a multiple CPU system
is composed of the Basic model QCPU and the C Controller module.
C Controller module Basic model
*1
QCPU
High Performance
*1
model QCPU
2, 3
Slim type main base unit * *
Slim type power supply/input/output/
intelligent function module